60W LED flood light

【1】Product Appearance

speciality:

1,Adopting integrated Chip as light source with high lighting efficiency (70-80LM/W) , high CRI(Ra>70), good quality heat dissipation, low light degradation.

2,Aluminum alloy die cast housing, good strength, high quality heat dissipation. anti corrosion and baking varnish surface, can be for outdoor using.

3,Make a dedicated luminous intensity distribution design via the aluminum reflector, there are two options for lighting distribution, one is for focusing, another is for diffusing.

4,Wide Input Voltage from 90V~264VAC,constant voltage constant current output, can start up at once, no flicker, lightning protection, PFC function available.

【2】Shape Structure

Shell Material：Aluminum Alloy    Shell Color：hoar/Black

Net Weight：6.5Kg

Unit：mm  ±1mm

【3】Parameter

【4】Diagram of degradation for Luminous

1,The data above has been got at a temperature of 25 Celsius degree and taking 1000 hours running by a nonstop way.

2,Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.

【5】Photomatric Data

【6】Illumination Distance/illuminance/Irradiated Area

【7】Packing specification

Packing Dimension:（L）447*(W) 300*(H) 338mm    2PC/CTN   15Kg

【8】Using and installing instructions

Installation Procedure

As Picture No.1 showed, fix the lamp to mounting surface with 3 screws.

As Picture No.2 showed, unscrew the retaining screw, take down the fitting.

As Picture No.3 showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

Mounting Method

Attentions：

1，Only professional electrician can install the lamp, please check the lamp very carefully before installation.

2，Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.