LED High Bay Light 150W

【1】Product  Descriptions:
a.Patented  appearance  design,  wide  heat  dissipation  surface,  good  thermal  conductivity,  impact  strength  of power pack meets requirements of anti-explosion standard.

b. Dedicated high power integrating LED, Luminous efficiency up to 70~80LM/W,CRI>80Ra.

c. Reasonable heating dissipation design, high power can up to 200W.,Juction temperature is less than 85℃,lifespan is more than 35,000 hours.

d. Pretty appearance without dirt retention, Gives a good protecting rate:IP65,High efficiency power supply which can pass several certificates with input voltage:100~277VAC.

【2】Shape  Structure

Shell Material：Aluminum Alloy
Shell Color：hoar/ Black
Weight：12Kg

Unit：mm  ±2mm

【3】Parameter

【4】Diagram of degradation for Luminous

a.Thedataabovehasbeengotatatemperatureof25celsiusdegreeandtaking1000hoursrunningbyanonstopway.

b. DegradationofluminousfluxofLEDlampsdependsonenvironmentalconditions.Thehigherthetemperature,the longertheusing time,the fasterluminous flux drops.

【5】Photomatric  Data

【6】Illumination Distance/illuminance/IrradiatedArea

【7】 Packing  specification

Body（L）412×(W)312×(H)508mm    1PC/CTN    13.5Kg

Reflector（L）432×(W)432×(H)534mm    10PCS/CTN   4.5Kg

【8】Using  and  installing

•  Please firstly install the reflector properly on the heat sink, and screw down.
• Then screw down the hoop into the top cap.
• Hang the body lamp on the installation site.
• Please hang the chaining steel wire on another installation device.
• Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

Attentions：

a. Only  professional  electrician  can  install  the  lamp,  please  check  the  lamp  very carefully before installation.

b. please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.

c. Water Joint is convenient to installation, uninstallation, maintenance.