UFO 200W LED high bay light-ShenZhen Forever-Light Electronics Co.,Ltd.,_

Home > Products > Lighting Fixture > Industrial Lighting >High Bay Lights

UFO 200W LED high bay light

MOQ ：50 piece

Lead Time ：7 Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : T/T,Western Union,Pay Pal

Departure Port : Shenzhen

Product details

Supply Ability

Supply Ability：20000 piecesWarranty(Year)：3 Year

Packaging & Delivery

Length：41.2 cmWidth：31.2 cm
Height：55.8 cm
Packaging：1 piece

Product Specifications

Product Description

200W led high bay light, led industrial light,high power LED high bay light

【1】Product Descriptions:

a.Patented appearance design, wide heat dissipation surface, good thermal conductivity, impact strength of power pack meets requirements of anti-explosion standard.

b. Dedicated high power integrating LED, Luminous efficiency up to 80~100LM/W,CRI>80Ra.

c. Reasonable heating dissipation design, high power can up to 200W.,Juction temperature is less than 85℃,lifespan is more than 35,000 hours.

d. Pretty appearance without dirt retention, Gives a good protecting rate:IP65,High efficiency power supply which can pass several certificates with input voltage:100~240VAC.

【2】Shape Structure

Shell Material: Aluminum Alloy
Shell Color: hoar/ Black
Weight: 13.5Kg

【3】Parameter

Input Voltage	AC100～240V	Color Rendering Index	Ra＞80
Frequency Range	50～60Hz	Beam Angle	>100°
Power Factor	>0.97	LED Reduction Rate	1～3% / 1,000Hrs
Power Efficiency	>92%	Color Temperature	2700～7000K
LED Working Voltage	DC30～36V	Working Temperature	-20℃～+45℃
LED Power	200W	IP Grade	IP65
Total Power	217W	Working Life-span	>35000H
Luminous Efficiency	80～100lm / W	Power line	VDE 3×1.5mm2
Connect wires	Brown→L Blue→N Yellow or Green→G

【4】Diagram of degradation for Luminous

a.Thedataabovehasbeengotatatemperatureof25celsiusdegreeandtaking1000hoursrunningbyanonstopway.

b. DegradationofluminousfluxofLEDlampsdependsonenvironmentalconditions.Thehigherthetemperature,the longertheusing time,the fasterluminous flux drops.

【5】Photomatric Data

【6】Illumination Distance/illuminance/IrradiatedArea

【7】 Packing specification

1、 Body（L）412×(W)312×(H)558mm 1PC/CTN 15.5Kg

2、 Reflector（L）472×(W)472×(H)299mm 10PCS/CTN 4.5Kg

【8】Using and installing

Installation Procedures

1,Please firstly install the reflector properly on the heat sink, and screw down.

2,Then screw down the hoop into the top cap.

3,Hang the body lamp on the installation site.

4,Please hang the chaining steel wire on another installation device.

5,Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

7,The male waterproof joint equiped with 1.0 meter cable.

8,The female waterproof joint can be connected to the input end of lamp while producing.

9,Except normal wire connecting, this UFP-LIGHT can equiped with such male and female waterproof joints for easy installation and maintenance.

Attentions：

a. A licensed electrician must undertake this installation. Please check the lamp carefully before installation.

b. Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.

c. The waterproof joint is only a choice for easy installation and maintenance, not standard come with lamps.