LED high bay light,LED high bay lamp,high power LED high bay light

【1】Product Appearance

Specialty：

【1】Patented appearance design with wide heat dissipation surface, this lamp has good heat conduction property, and the impact strength of its power box compliant to anti-explosion standard.

【2】Using high power integrating LED, the lamp’s luminous efficiency can reach 80~100LM/W, and CRI>80Ra,Fins heating dissipation design enables the LED Tj within 85℃, and power up to 200W, lifespan more than 35,000 hours.

【3】"Distributing light with optical lens" design, gather the light to appropriate angle, to achieve a maximum utilization of the LED lighting source, light spot uniformity, no black spots, no shadow, high light transmittance.

【4】Distribute the light with aluminum reflector; achieve the utilization rate as high as possible.

【2】Shape Structure

Shell Material：Aluminum Alloy    Shell Color：hoar/Black

Net Weight：8.3Kg

Unit：mm  ±2mm

【3】Parameters

【4】Luminous flux reduction diagram

1、 The data above was testing at environment temperature of 25 Celsius degree after 1000 hours constant lighting.

2、 The environment condition will affects luminous flux reduction. Luminous flux will drops faster at a higher temperature or a longer lighting time.

【5】Photomatric Data

【6】Illumination Distance/illuminance/Irradiated Area

【7】Packing specification

1、Body（L）412×(W)312×(H)428mm        1PC/CTN    10Kg

【8】Using and installation instructions

1.   Installation Procedures

【1】Then screw down the hoop into the top cap.

【2】Hang the body lamp on the installation site.

【3】Please hang the chaining steel wire on another installation device.

【4】Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

【5】The male waterproof joint equipped with 1.0 meter cable.

【6】The female waterproof joint can be connected to the input end of lamp while producing.

【7】Except normal wire connecting, this UFO-LIGHT equipped with such male and female waterproof joints for easy installation and maintenance.

Attentions：

1.      A licensed electrician must undertake this installation. Please check the lamp carefully before installation.

2.      Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.

3.      The waterproof joint is only a choice for easy installation and maintenance, not standard come with lamps.