specialty：

【a】Adopting integrated Chip as light source with high lighting efficiency(70－80LM/W) ,high CRI(Ra>70),good quality heat dissipation,low light degradation.

【b】Aluminium alloy die cast sheel, good strength,high quality heat dissipation.anti corrosion and baking varnish surface,can be for outdoor using.

【c】Make a dedicated luminous intensity distribution design via the aluminium reflector,there are two options for lighting distribution,one is for focusing,another is for divergencing.

【d】Wide Input Voltage from 90V~264VAC,constant voltage constant current output,can start up at once,no flicker,lightning protection,PFC function available.

【2】Shape Structure

• Shell Material：Aluminum Alloy         Shell Color：Black    
• Net Weight：19Kg
• Unit：mm  ±2mm

【3】Parameter

【4】Diagram of degradation for Luminous

1、The data above has been got at a temperature of 25 celsius degree and taking 1000 hours running by a nonstop way.

2、Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.

【5】Photomatric Data

【6】Illumination Distance/illuminance/Irradiated Area

【7】Packing specification

1、Packing Dimension：（L）1000×(W) 360×(H) 264mm  1PC/CTN  21Kg

【8】Using and installing instructions

As Picture No.2showed,fix the lamp to mounting surface with 3 screws.

As Picture No.1 showed,unscrew the retaining screw,take down the fitting.

As Picture No.3 showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

【4】Male Water joint, equip with 1 meter power wire.

【5】Female water joint,, can be connected to input end of lamp when the light has been produced.

【6】Besides of normal wire connecting way, it’s convenient to installation, uninstallation, maintenance with the special equipment.

2.    Mounting Method

Attentions：

Only professional electrician can install the lamp, please check the lamp very carefully before installation.

Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.